CATEGORY
12V Multi-function Jump Starter
12V Multi-function Jump Starter
Item No.: K43D397
.Battery capacity:12000mah   
.LED:Lighting、SOS、 Flash    
.Input: 15V/1A   
.Output: Car boot port 12V,jump starter at only 12V   
.Output: 12V/16V/19V, USB 5V/2.1A   
.Charging Time: 5.5 hours   
.Starting Current: 300 A   
.Peak Current: 650 A   
.Housing Material: Aluminium   
.Size:186*82*41.5mm  
.Accessories: 1pc smart clamp,1pc  USB Cable(Nokia,Mini USB,Micro USB),1pc UL Home Adapter, 1pc Car Adapter,1 Notebook Adapter Cable And 8 Notebook Interfaces   
.Reverse charge protection   
.Short-circuit protection   
.Reverse polarity protection   
.When we use the smart clamp to start car successfully, we need to disconnect the smart clapm from the jump starter each time, so during the start-up process, the temperature will not raise up.   
.No-spark   
.Work end with no ignition within 30s   
.When the car start current higher than the jump starter's rated current,will be protetion   
.Over discharge protection,Automatically detect voltage products, less than 10V/±0.5V will not be able to work   
When the current reaches more than 400 a, persists for more than 3 seconds, smart clamp will automatically cut off the circuit, protection products and car batteries