Item No.: H33A091

.Metric taps & dies sizes: M3x0.5, M3x0.6, M4x0.7, M4x0.75,

M5x0.8, M5x0.9, M6x1.0, M7×1.0, M8x1.25, M9x1.0, M9x1.25,

M10x1.25, M10x1.5, M11x1.5, M12x1.5, M12x1.75.

SAE taps & dies sizes: 4-40 NC, 6-32 NC, 8-32 NC, 10-32 NF

10-24 NC, 12-24 NC, 1/4-20 NC, 1/4-28 NF,5/16-18 NC,

5/16-24 NF, 3/8-16 NC, 3/8-24 NF, 7/16-14 NC, 7/16-20 NF,

1/2-13 NC, 1/2-20 NF, 1/8-28 BSP, 1/8-27 NPT.

1PC includes tap wrench

2PC T-handle tap wrench

1PC die wrench

1PC screwdriver

2PC thread pitch gauge(SAE & Metric).

Material:GCR15