Item No.: B11D046

.MCU(Microprocessor Controlled Unit) and Intuitive multi- color LED indication.  And Stops charging automatically when  battery is fully charged or topped off, switching to float mode monitoring.

.8LEDS indication shows charging Status 25% 50% 75% 100%
.Suitable for all 6V &12-volt lead acid battery chemistris including flooded (wet), maintenance-free, AGM and gel cell. Suitable for 12V LifePO4 batteries.
.Retains last selected mode in memory so in the event AC  power is disrupted (e.g. power failure) the charger will  re-start in the last selected mode once power is restored
.Built-in safety protections include reverse polarity,short circuit,open circuit,spark-proof,overheat,overcurrentand overcharge
.Available for charging 12V battery as low as 3V
.Energy efficient switch-mode technology makes it compactand lightweight
.Design with Hook for easy use
.Specifications:
.Charging Current:

12V STD：2.0A
12V LFP：2.0A
6V STD：2.0A
.Battery Voltage: 6V/12V
.Power: 35W
.Voltage AC:220-240VAC,50-60HZ
.Charging type:6-Steps,Fully automatic
.Cable Length: 1.8M with BS Plug
.Battery Capacity:4-60Ah
.Insulation class:IP65
.Indication:LED
.Battery Type:All type 6V/12V Lead-Acid Battery&12V LiFePO4 Battery
.With Quick connector:clamps+O-ring
.Certificates:CE-EMC/CE-LVD/GS/ROHS/REACH